Home Vestnik MGSU Library Vestnik MGSU 2013/9 Using LabVIEW software to collect and process measurement data as partof development of systems of monitoring of bearing structures

INFORMATION SYSTEMS AND LOGISTICS IN CIVIL ENGINEERING

Using LabVIEW software to collect and process measurement data as partof development of systems of monitoring of bearing structures

  • Korgin Andrey Valentinovich - Moscow State University of Civil Engineering (MGSU) Doctor of Technical Sciences, Professor, Supervisor, Scientific and Educational Center of Constructions Investigations and Examinations, Department of Test of Structures, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; +7 (499) 183-54-29; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Emel'yanov Valentin Alekseevich - Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, Junior Researcher, Scientific and Educational Center for Engineering Research and Monitoring of Structural Units, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoye shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Ermakov Mikhail Valer'evich - Moscow State University of Civil Engineering (MGSU) Junior Researcher, Scientific and Educational Center for Engineering Research and Monitoring of Structural Units, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoye shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Zeid Kilani Leys Zeydovich - Moscow State University of Civil Engineering (MGSU) Junior Researcher, Scientific and Educational Center for Engineering Research and Monitoring of Structural Units, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoye shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Krasochkin Aleksandr Gennad'evich - Moscow State University of Civil Engineering (MGSU) technician, Scientific and Educational Center for Engineering Research and Monitoring of Structural Units, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoye shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Romanets Vladimir Anatol'evich - Moscow State University of Civil Engineering (MGSU) technician, Scientific and Educational Center for Engineering Research and Monitoring of Structural Units, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoye shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 134-142

Present-day urban construction trends make buildings taller and the urban environment denser. These developments result in the growth of negative effects produced on existing structures. That’s why the monitoring of the technical condition of structures is of vital importance. Now the most efficient way of forecasting and preventing emergency situations consists in the installation of automated monitoring systems operating in continuous and periodic modes.Monitoring systems may comprise various sensors, devices and measurement elements. Any signal must be coordinated to make sure that the data are accurate and reliable. Moreover, the proposed system (or network) composed of various items of equipment (often produced by various manufacturers) demands appropriate integrated software. The database of LabVIEW drivers can be employed for this purpose.LabVIEW environment is applied for the measurement, testing and management of applications that constitute embedded programming tools needed to develop complex applications designated for computer-aided measurements and data processing. The library of drivers is employed to assure the availability of the most common types of interfaces, sensors and devices. If a user lacks a particular driver, it can be either integrated or developed. The authors have successfully collected and processed the data in the LabVIEW environment of a measurement system based on tensometric sensors attached to experimental items of equipment.

DOI: 10.22227/1997-0935.2013.9.134-142

References
  1. Korgin A.V., Korgina M.A. Integrirovannaya informatsionnaya tekhnologiya monitoringa tekhnicheskogo sostoyaniya zdaniy i sooruzheniy [Integrated Information Technology for the Monitoring of the Technical Condition of Buildings and Structures]. Nauchnye trudy 12 Mezhdunarodnoy mezhvuzovskoy nauchno-prakticheskoy konferentsii molodykh uchenykh, doktorantov, aspirantov «Stroitel'stvo – formirovanie sredy zhiznedeyatel'nosti» [Research works of the 12th International Inter-university Science and Practical Conference of Young Researchers, Doctoral Students and Postgraduates “Construction – Formation of the Environment”. Moscow, 2009, pp. 75—78.
  2. Korgin A.V., Emel'yanov M.V. Intellektual'naya sistema avtomaticheskogo monitoringa tekhnicheskogo sostoyaniya stroitel'nykh konstruktsiy [Intelligent System for Computer-aided Monitoring of the Technical Condition of Structural Units]. Mekhanizatsiya stroitel'stva i ZhKKh [Mechanization of Construction Operations and Housing Utilities]. 2010, no. 9, pp. 18—20.
  3. Shakhraman'yan A.V. Tekhnologicheskie i metodicheskie osnovy postroeniya sistem monitoringa nesushchikh konstruktsiy vysotnykh i unikal'nykh ob"ektov [Technological and Methodological Fundamentals of Development of Systems of Monitoring of Bearing Structures of High-rise and Unique Buildings]. Predotvrashchenie avariy zdaniy i sooruzheniy: elektronnyy zhurnal [Prevention of Emergencies of Buildings and Structures: electronic journal]. Available at: http://www.pamag.ru/pressa/tech-construct. Date of access: 21.07.13.
  4. Data Acquisition and Signal Conditioning Course Manual. National Instruments Course Software. Ver. 2011. February 2012, pp. 74—76.
  5. Suranov A.Ya. LabVIEW 8.20 Spravochnik po funktsiyam [LabVIEW 8.20. Reference Book of Functions]. DMK Press Publ., 2007, pp. 57—133.
  6. Trevis Dzh., Kring Dzh. LabVIEW dlya vsekh [LabVIEW for Everybody]. DMK Press Publ., 2008, pp. 27—95.
  7. Preimushchestva kontseptsii graficheskogo programmirovaniya NI LabVIEW [Advantages of the Concept of Graphic Programming in LabVIEW]. Available at: http://www.LabVIEW.ru/LabVIEW/what_is_LabVIEW/rapid_development.php Date of access: 23.04.2013.
  8. Peych L.I., Tochilin D.A., Pollak B.N. LabVIEW dlya novichkov i spetsialistov [LabVIEW for Beginners and Specialists]. Moscow, Goryachaya Liniya — Telekom Publ., 2004, pp. 33—46.
  9. Zagidullin R.Sh. LabVIEW v issledovaniyakh i razrabotkakh [LabVIEW in Researches and Developments]. Moscow, Goryachaya Liniya – Telekom Publ., 2005, pp. 216—251.
  10. Batovrin V.K., Bessonov A.S., Moshkin V.V., Papulovskiy V.F. LabVIEW praktikum po osnovam izmeritel'nykh tekhnologiy [LabVIEW Practice Book on Fundamentals of Measurement Technologies]. DMK Press Publ., 2010, pp. 36—49.

Download