ECONOMICS, MANAGEMENT AND ORGANIZATION OF CONSTRUCTION PROCESSES

Using structural actions to improve organizationaland technological reliability of construction activities

Vestnik MGSU 3/2013
  • Zhavnerov Pavel Borisovich - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Information Systems, Technologies and Automation in Civil Engineering, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Ginzburg Aleksandr Vital’evich - Moscow State University of Civil Engineering (MGSU) (National Research University) Doctor of Technical Sciences, Professor, chair, Department of Information Systems, Technologies and Automation in Construction, Moscow State University of Civil Engineering (MGSU) (National Research University), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 196-200

The process of construction is a complex probabilistic system characterized by complete (work stoppage) and partial failures reducing their intensity and causing failure to comply with the work performance schedule. Organizational and technological reliability (OTR) is an important criterion of successful operation of a construction company. In the construction industry, OTR represents the ability to maintain the operating parameters of a construction company within the pre-set values.Assimilation of advanced technologies, diversity of construction materials, multiplicity of contractors, a wide range of construction operations require improvements in their reliability, an adequate assessment of the cost of construction and a lower discrepancy between scheduled deadlines and practical delivery terms. OTR improvement in the construction industry is one of the main challenges for construction companies.

DOI: 10.22227/1997-0935.2013.3.196-200

References
  1. Sedykh Yu.I., Lazebnik V.M. Organizatsionno-tekhnologicheskaya nadezhnost’ zhilishchno-grazhdanskogo stroitel’stva [Organizational and Technological Reliability of Residential Construction]. Moscow, Stroyizdat Publ., 1989, 396 p.
  2. Batienkov V.T., Chernobrovkin G.Ya., Kirnev A.D. Tekhnologiya i organizatsiya stroitel’stva. Upravlenie kachestvom v voprosakh i otvetakh [Technology and Organization of Construction Activities. Quality Management in Questions and Answers]. Rostov-on-Don, Feniks Publ., 2007, 400 p.
  3. Ginzburg A.V. Avtomatizatsiya proektirovaniya organizatsionno-tekhnologicheskoy nadezhnosti stroitel’stva [Automated Design of Organizational and Technological Reliability of Construction Activities]. Moscow, SIP RIA Publ., 1999, 155 p.
  4. Sinenko S.A. Informatsionnaya tekhnologiya proektirovaniya organizatsii stroitel’nogo proizvodstva [Information Technology Applicable to Design of Construction Operations]. Moscow, NTO «Sistemotekhnika i informatika» publ., 1992, 258 p.

Download

Methodology of choosing a construction company for tender on the basis of estimating complexe fficiency index

Vestnik MGSU 10/2013
  • Saydaev Khassan Lom-Alievich - Moscow State University of Civil Engineering (MGSU) Assistant, Department of Technology and Organization of the Construction, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 266-271

In the given article the author presents an algorithm of choosing a construction company for the purpose of tendering, the same as the techniques of complex efficiency index improvement. The developed algorithm offers a comprehensive approach in order to determine the readiness of a construction company for construction projects. An ideal organizational and management model is developed in order to improve the competitive ability of construction companies. According to this model complex efficiency index is calculated. Organizational and management model is formed by six parameters. Each of them have three levels of significance. Expert judgment was used in order to identify the importance of each parameter in the whole system. The six parameters are: the total value of the contracts of the construction company for the last calendar year; organizational and technological standards of the company; environmental standards; workforce management; information technology; the company's portfolio. As a result, the construction company with the highest CEI is pronounced the winner of tendering. Thus, the developed method of complex efficiency index calculation can be used to improve the efficiency of a company by adjusting the organizational and management system. The proposed method of calculation should contribute to the development of the construction industry within the framework of competition in the Russian Federation.

DOI: 10.22227/1997-0935.2013.10.266-271

References
  1. Lapidus A.A., Saydaev Kh.L. Neobkhodimost' vvedeniya standartov genpodryadnykh organizatsiy, kak vazhneyshiy instrument razvitiya stroitel'noy otrasli [The Need to Introduce Standards for General Contractors as an Important Instrument of Development in the Construction Industry]. Tekhnicheskoe regulirovanie. Stroitel'stvo, proektirovanie i izyskaniya [Technical Regulations. Construction, Engineering and Research]. 2011, no. 7(8), pp. 36—38.
  2. Saydaev Kh.L. Sistema menedzhmenta kachestva kak neobkhodimyy instrument razvitiya stroitel'noy otrasli [The Quality Management System as a Necessary Instrument of Development in the Construction Industry]. Tekhnicheskoe regulirovanie. Stroitel'stvo, proektirovanie i izyskaniya [Technical Regulations. Construction, Engineering and Research]. 2012, no. 2, pp. 37—38.
  3. Lapidus A.A., Saydaev Kh.L. Vliyanie parametrov formirovaniya organizatsionnoy struktury stroitel'noy kompanii na obobshchennyy pokazatel' ekologicheskoy nagruzki [The Influence of the Parameters of the Organizational Structure Formation of the Construction Company on a Generic Indicator of Environmental Stress]. Tekhnologiya i organizatsiya stroitel'nogo proizvodstva [Technology and Organization of the Construction]. 2012, no. 1, pp. 50—52.
  4. Adler Yu.P., Markova E.V., Granovskiy Yu.V. Planirovanie eksperimenta pri poiske optimal'nykh usloviy [Experiment Planning in Case of Choosing the Best Conditions]. Moscow, Nauka Publ., 1976, 279 p.
  5. Berezhnyy A.Yu., Saydaev Kh.L.-A. Ispol'zovanie kompleksnogo pokazatelya ekologicheskoy nagruzki pri vybore podryadnoy organizatsii [The Use of the Complex Index of Environmental Stress when Choosing a Contractor Organization]. Tekhnicheskoe regulirovanie. Stroitel'stvo, proektirovanie i izyskaniya [Technical Regulations. Construction, Engineering and Research]. 2012, no. 1, pp. 26—27.
  6. Volkov A.A. Virtual'nyy informatsionnyy ofis stroitel'noy organizatsii [Virtual Information Office of a Construction Organization]. Stroitel'nye materialy, oborudovanie, tekhnologii XXI veka [Construction Materials, Equipment, Technologies of the 21st century]. 2002, no. 2, pp. 28—29.
  7. Losev K.Yu., Losev Yu.G., Volkov A.A. Razvitie modeley predmetnoy oblasti stroitel'noy sistemy v protsesse razrabotki informatsionnoy podderzhki proektirovaniya [Building System Subject Area Development During the Process of Design-Cals-System Work out].Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 1, vol. 1, pp. 352—357.
  8. Volkov A.A., Pikhterev D.V. K voprosu ob organizatsii informatsionnogo obespecheniya stroitel'nogo ob"ekta [Some Aspects of Information Support Organization for Construction]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 6, pp. 460—462.
  9. Volkov A.A. Kompleksnaya bezopasnost' uslovno-abstraktnykh ob"ektov (zdaniy i sooruzheniy) v usloviyakh chrezvychaynykh situatsiy [Integrated Safety of the Conditionally Abstract Objects (Buildings and Structures) in Emergency Situations]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2007, no. 3, pp. 30—35.
  10. Volkov A.A., Lebedev V.M. Proektirovanie sistemokvantov rabochikh operatsiy i trudovykh stroitel'nykh protsessov v srede informatsionnykh tekhnologiy [Designing of System Quanta of the Working Operations and Building Processes in the IT Environment]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2010, no. 2, pp. 293—296.
  11. Volkov A.A. Osnovy gomeostatiki zdaniy i sooruzheniy [Fundamentals of the Homeostatics of Buildings and Structures]. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering]. 2002, no. 1, pp. 34—35.
  12. Volkov A.A. Sistemy aktivnoy bezopasnosti stroitel'nykh ob"ektov [Active Protective Systems of Building Objects]. Zhilishchnoe stroitel'stvo [House Construction]. 2000, no. 7, pp. 13.
  13. Volkov A.A., Chelyshkov P.D., Sedov A.V. Teoriya otsenki udel'nogo potrebleniya otdel'nykh vidov energoresursov [The Theory of Estimating Specific Consumption of Certain Types of Energy Resources]. Avtomatizatsiya zdaniy [Building Automation]. 2010, no. 78(42—43), pp. 26—27.

Download

Results 1 - 2 of 2